External function
The watch comes with an external speaker, which can play the recording directly without other equipment.

One-click recording
Press the button to start recording, the operation is simple, and it can be used quickly in various occasions.

Recording indicator
The indicator light will automatically turn off after power on for 3 seconds to start recording, and the indicator light will not light up during the recording process.

Recording: The red light flashes for 3 seconds and automatically turns off to start recording.

Play: Blinking blue



Charging: The red light flashes slowly, and the red light stays on when fully charged.

Low battery: purple flashing quickly


35 hours of continuous recording

The recording battery and the watch battery are different power supply systems and do not interfere with each other.


Segmented save

When the recording file reaches 2GB, it will be automatically saved as a file.


Use on multiple occasions

Meeting recording

Wear decoration

Class recording

Leisure listening to music

Mountain climbing


Use the tutorial

A button (Power On/Off/Save/Play/Pause)

B button (Volume+/Previous song/Mode switch)

C button (Volume-/Next/Record)

D button (Adjusting hands/Adjusting time)



Adjust the time

D button to dial out, then turn the button to adjust the pointer and adjust the time.



Power on/off

Power on: Press and hold the A button for 3 seconds, the blue and red lights will light up at the same time, release the button, and the lights will be on, indicating that the machine is turned on.

Power off: In any boot situation, press and hold the A button for 3 seconds, the blue and red lights will light up once at the same time, and if it goes out, it means it has been turned off.

Note: The machine will automatically shut down if there is no operation for 90 seconds, and the machine will also automatically shut down when the battery is low.



Start recording/Save recording

Start recording: In the power-on state, press and hold the C button for 2 seconds, the red light will turn on, release the button, flash 3 times and then turn off to start recording.

Save the recording: In the recording state, press and hold the C button for 2 seconds, the blue light will flash once, and the red light will be solid at this time, indicating that the recording has been exited and the file has been saved.

(Check whether the machine is still recording: during the recording process, just press the B button once, the red light flashes, which proves that the recording is still in progress.)


Packing list:

Voice recorde*1

Data cable*1

Headphone adapter* 1

User Manual(English)*1