Description

PVC Imperial Pressure Pipe 90 Elbow

Pressure Pipe 90 Degree Bends should be used in conjunction with PVC Pressure Pipework. These 90 Degree Bends/Elbows are used to join 2 same diameter pieces of PVC Pressure Pipe together at a 90 degree angle. Imperial Pressure Pipework and fittings are strong and durable and will provide a permanent connection when secured with Solvent Cement. These items are available in 6 different sizes 4″, 3″, 2″ ,1.5″,1.25″ and 1″.

4″ Pressure Pipe 90 Elbow

• Overall Height 190mm
• Overall Width 135mm

3″ Pressure Pipe 90 Elbow

• Overall Height 150mm
• Overall Width 105mm

2″ Pressure Pipe 90 Elbow

• Overall Height 110mm
• Overall Width 75mm

1.5″ Pressure Pipe 90 Elbow

• Overall Height 90mm
• Overall Width 60mm

1.25″ Pressure Pipe 90 Elbow

• Overall Height 75mm
• Overall Width 48mm

1″ Pressure Pipe 90 Elbow

• Overall length 60mm
• Overall Width 42mm

At Hatton Koi we understand The importance of pipe work, mistakes made in pipework are one of the most common we come across and can be very costly and hard to change at a later date.

There are three main types of pipe work used on koi ponds:

• Metric Pressure Pipe
• Imperial Pressure Pipe
• Black waste pipe

The use of anything other than pressure pipe and fittings for both gravity and pressure lines is risky, the last thing you want is your bottom drain line leaking after all your hard work building your pond and is only a cost saving exercise, The added security and peace of mind that Pressure Pipe brings is well worth the extra cost. Unfortunately the use of pressure pipe and fittings in the past has simply been too expensive for the majority of Koi keepers, despite it being the preferred choice. here at Hatton Koi we are looking to bring you a full range of pipe fittings for every occasion.

we are happy to provide assistance, should you need it,  please Contact Us if you need assistance in choosing the right pipe work for your project.